- 1 Links
- 2 Purpose
- 3 Web security
- 4 Arguments
- 5 Usage
- 6 Features
- 7 Enabling SSL (https) support
The mhttpd utility runs the MIDAS Web Server which allows the user to communicate with an experiment using any web browser. It is used primarily for run control.
For maximum web security, mhttpd should be run behind a password-protected Apache/nginx HTTPS proxy (see Security for details).
By default (since March 2020) mhttpd binds to port 8080, and accepts connections from localhost only. This is ideal behaviour if you are behind an Apache/nginx proxy. You may change the port number by editing the localhost port ODB key in the Webserver ODB tree.
To change the security model (e.g. to allow http/https connections from other machines), see the relevant keys in the Webserver ODB tree.
-a add hostname to the hostlist of hosts allowed to connect to mhttpd -e experiment to connect to -h connect to midas server (mserver) on given host -v display verbose HTTP communication -D become a daemon -E only display ELog system -H only display history plots --verbose-mg - trace mongoose web requests --trace-mg - trace mongoose events --no-trace-mg-recv - do not trace mongoose recv events --no-trace-mg-send - dop not trace mongoose send events --no-multithread - disable mongoose multithreading --no-passwords - disable password protection --no-hostlist - disable access control host list
To start the webserver
- "mhttpd" or
- "mhttpd -v" to get debug information, or
- "mhttpd -D" to run in the background
- "mhttpd -a myHost1 -a myHost2" to restrict web access
If you have enabled https connections in the Webserver ODB tree, a password file (and optionally an SSL certificate) need to be created when mhttpd is started for the first time. See mhttpd HTTPS/SSL server for more information.
By default, mhttpd enables IPv6 support. This is fine on most modern operating systems, but some older ones (including SL7) may not understand the IPv6 localhost address (::0). If mhttpd fails to start because it can't bind to ::0, disable "Enable IPv6" in the Webserver ODB tree.
Debugging "Cannot mg_bind address" problems
If mhttpd print errors like this when you try to start it, there are two possible issues.
[mhttpd,ERROR] [mhttpd.cxx:19309:mongoose_listen,ERROR] Cannot mg_bind address "localhost:8081"
- Some other program may be using the port you specified. You could try finding which program is that us with "lsof -i :8081" or similar.
- If the problematic address is "[::0]:8081" (rather than "localhost:8081"), then you may not have full IPv6 support. Try disabling "Enable IPv6" in the Webserver ODB tree.
The Midas web server mhttpd provides a means for run control including monitoring of the run parameters. Its main feature is a web page invoked through any web browser accessing the Midas experimental URL at a defined port (see Usage).
The contents of this Midas status page is composed with minimal information relative to the experiment. It contains a collection of buttons and links to other pages to further describe and control the configuration of the experiment.
- Minimal display on the main Status Page
- Experiment name, time & date, page refresh rate
- Standard Menu Buttons (see below)
- User defined buttons (e.g. alias links, run scripts, custom pages etc.)
- run comments and condition display section (if enabled)
- Equipment list with current running condition, number of event received, event rate, data rate for each equipment.
- Data logging statistics (number of event recorded, data size recorder, compression factor, usage storage level) if enabled.
- Secondary Data logging (data mover) with statistics if enabled.
- Single line of the most recent Midas message.
- Table of the current applications connected to this experiment.
- Standard Menu Buttons
- Transition the state of the run (stopped/running/paused), allows user running condition parameters to be entered at the start state (see Edit-on-start Parameters).
- Access to the full Online Database for data display and/or data content modification.
- Display the Message Page, which shows messages generated by the MIDAS [Message System]] as well as the user using cm_msg() functions.
- Access to ELOG Page switches to the predefined "electronic logbook".
- Access to the Alarms Page for monitoring the different type of alarms (evaluated, programs, internals, periodic).
- Access to the Programs Page for a status or interaction with the current running applications part of the Midas experiment.
- Access to the History Page for graphical data representation of any ODB variables and acquired data.
- Access to the Midas Slow Control Bus devices MSCB Page connected to this experiment.
- Access to the Sequencer Page control/monitoring page for Sequencer i.e. interactive loading/saving/running of a run sequence based on any ODB parameters.
- Access to the Chat Page for communication between users on the same experiment.
- Access to the Help Page with short-cut to the Midas Help documentation resource and other information.
- links to all the listed equipments invoking a dedicated page for the display and possible control of the equipment parameters.
- link to the logger configuration (if present) for the data recording.
- link to the possible secondary logging configuration parameters (if present).
As of March 2020, you may also use mhttpd as a proxy to other webservers.
Enabling SSL (https) support
mhttpd is built on the [embedded web server], and by default it listens on port 8080 on localhost only.
If you want to listen on a secure port, you must:
- Configure which ports to listen on in the Webserver ODB tree
- Build mhttpd with SSL support enabled
- Create an SSL certificate
- Create a password file
mhttpd with Mongoose requires an SSL Certificate and a password file. Ideally, an SSL Certificate issued by a well-known authority trusted by your browser should be used.
The first time mhttpd is run, if it does not find an SSL Certificate, it will print instructions on how to create a self-signed SSL Certificate. If it finds no existing password file, it will then print instructions on how to create a password file (see below for examples).
Build mhttpd with SSL support
SSL support is optional in mhttpd and is disabled by default! If you try to use an https port in mhttpd but do not have SSL support, the midas message log will show an error message like
[mhttpd,ERROR] [mhttpd.cxx:19180:mongoose_listen,ERROR] https port "8443" requested, but mhttpd compiled without MG_ENABLE_SSL
SSL support relies on the mbedtls package, which can be downloaded using a handy makefile shortcut. After downloading mbedtls, you must re-run "cmake" so that it will pick up the new mbedtls files and enable SSL support when compiling mhttpd:
cd $MIDASSYS make mbedtls cd build cmake .. # Look for the line like "-- MIDAS: Found MBEDTLS in /path/to/midas/mbedtls" make install
Create an SSL certificate
If mhttpd is configured to open an https connection, an SSL certificate is required. If needed, you may create a self-signed certificate by running mhttpd, and following the printed instructions:
[user@dasdevpc2 test]$ mhttpd Web server will listen on ports "8080r,8443s" [mhttpd,ERROR] [mhttpd.cxx:17086:mongoose,ERROR] cannot find SSL certificate file "/home/user/online/test/ssl_cert.pem" [mhttpd,ERROR] [mhttpd.cxx:17087:mongoose,ERROR] please create SSL certificate file: openssl req -new -nodes -newkey rsa:2048 -sha256 -out ssl_cert.csr -keyout ssl_cert.key; openssl x509 -req -days 365 -sha256 -in ssl_cert.csr -signkey ssl_cert.key -out ssl_cert.pem; cat ssl_cert.key >> ssl_cert.pem could not start the mongoose web server, see messages and midas.log, bye!
The certificate and key should be placed in one PEM file called ssl_cert.pem located in either MIDAS environment variables MIDAS_DIR or MIDASSYS, and the permissions on the file should be 600 or only owner read/write.
[user@dasdevpc2 test] chmod 600 ssl_cert.pem
Note that web browsers give scary warnings to users about accepting connections to servers with self-signed certificates. It is much better to get a full certificate from [Encrypt] or another certificate authority.
Create a password file
If mhttpd is configured to require passwords for access, you will need to create a password file using htdigest. Running mhttpd will tell you on the command-line (and in the midas message log) what you need to do.
[user@dasdevpc2 test]$ mhttpd Web server will listen on ports "8080r,8443s" Web server will use SSL certificate file "/home/user/online/test/ssl_cert.pem" [mhttpd,ERROR] [mhttpd.cxx:17137:mongoose,ERROR] mongoose web server cannot find password file "/home/user/online/test/htpasswd.txt" [mhttpd,ERROR] [mhttpd.cxx:17138:mongoose,ERROR] please create password file: htdigest -c /home/user/online/test/htpasswd.txt test midas could not start the mongoose web server, see messages and midas.log, bye!
Each person who is to have access to the experiment should create their own username and password. The first user (e.g. mary) creates the password file e.g. htpasswd.txt
[user@dasdevpc2 test]$ htdigest -c /home/user/online/test/htpasswd.txt test mary Adding password for mary in realm test. New password: Re-type new password: [user@dasdevpc2 test]$ mhttpd Web server will listen on ports "8080r,8443s" Web server will use SSL certificate file "/home/user/online/test/ssl_cert.pem" Web server will use authentication realm "test", password file "./htpasswd.txt"
Access to the Midas status page can be obtained by pointing a web browser to
The first time you connect you will be asked for a username and password. Now that the password file has been created, subsequent users may create their own username and password in the same file by omitting "-c" argument in htdigest, e.g.
htdigest /home/user/online/test/htpasswd.txt test john
Web access can be restricted to certain hosts if desired (see #Web security).
Documentation for the version of mongoose included with MIDAS can be found at Mongoose documentation.
For more information see Elog note 1062
For maximum web security, mhttpd should be run behind a password-protected Apache/nginx HTTPS proxy (see Security for details). mhttpd should be built with HTTPS and built-in passwords disabled, http access restricted to localhost (or the host of the httpd, if they are not the same).
Alternatively, mhttpd can be run with good web security using password-protected secure HTTPS connections. This is the default case, where mhttpd is explicitly linked with OpenSSL to provide secure HTTPS connections via the Mongoose web server. To connect to an experiment using mhttpd, a username and password are required.
Pre-March 2020 mhttpd Arguments
-h connect to midas server mserver on given host -e experiment to connect to -v display verbose HTTP communication -D become a daemon -E only display ELog system -H only display history plots -a only allow access for specific host(s), several [-a Hostname] statements might be given (default list in ODB at /Experiment/security/mhttpd hosts/allowed hosts) --http port - bind to specified HTTP port (default is ODB /Experiment/midas http port) --https port - bind to specified HTTPS port (default is ODB /Experiment/midas https port) -help display usage information
Documentation on older versions of mhttpd can be found at Old and Obsolete Versions.